Directory

Flow Switches Category (34 companies)
Filter By: adjustable, fixed set point, inline, insertion, paddle, piston, shuttle, thermal, vane

Flow Switches in Wisconsin

State: CA, CT, DE, FL, GA, IL, IN, KS, MA, MN, NC, OH, PA, TN, TX, WI

  • Lake Monitors Inc

    Lake Monitors manufactures Weld Shield gas flow switches used to detect insufficient flow conditions for automated or controlled, shielded welding processes. Designs can accommodate 0.25"-0.375" pipe sizes, with a flow measuring accuracy of +/-5%, repeatability of +/-2%, maximum operating temperating of 150 PSIG, and maximum operating temperature of 240 degrees Fahrenheit. Response time is <50 mS.

    State: WI

Product Snapshots

  • Intek - Inline Flow Swithces - Intek

    Intek - Inline Flow Swithces

    Intek

    Intek offers Rheotherm inline flow switches with no moving parts and options for hazardous locations. Applications include all types of liquids and gases, big pipes or small lines, hot or cold. These inline flow switches can be installed with standard tube fittings, but are available with flanges, NPT, or sanitary fittings as options.
    • Service: Most liquids and gases
    • Max. Temperature: 140°F (60°C)
    • Max. Pressure: 500 - 1,000 psi
    • Sizes: C, 1/16, 1/8, 3/16, 1/4, 1/2, 3/4
    • Output: 1 SPDT relay (rated 10A@120 Vac)

  • IF Diaphragm and Paddle Style Mechanical Flow Switches

    SMC

    IF diaphragm and paddle flow switches are mechanical switches for the flow detection of water and non-corrosive liquids. For more corrosive liquids, options such as non-ferrous and stainless steel are available. Paddle style flow switches are suited to pipe sizes from 3/4” up to 6B. Diaphragm flow switches are available up to 3/4”.
    • Applicable fluids: Water and various liquids
    • Connection sizes: 3/8" to 3/4" for Diaphragm Series and 3/4" and 1" for Paddle Series
    • Flow rates: 1 l/min to 2600 l/min
    • Switch rating: Output switched up to 250VAC or 250VDC
    • Maximum pressure: 10bar
  • Autoflow Micro Flow Switches - Autoflow

    Autoflow Micro Flow Switches

    Autoflow

    Autoflow micro flow switches are an adjustable gas series with a range of 30 sccm to 20 slpm. There is a n SP-76 mount for modular sample systems. These flow switches are designed for hazardous locations, are fully field adjustable, and are shock, vibration and contamination resistant.
    • Switch Assembly: SPDT UL 61760
    • Fluid Media: Gases including corrosives
    • Pressure: 3000 psig max. (207 bar)
    • Operating Temperature: -40 F to 220 F (-40 C to 105 C)
    • Leakage: 1x10-7 cc/sec He max.

  • Type 8010 Mechanical flow switch for On/Off control

    Burkert

    This Inline flow switch is designed for use in pure water and water resembling fluids to monitor minimum/maximum flow. The switch is made up of a fitting and an electronic module. It is available in NO and NC configurations.
    • Sensor element: Blade with magnet, Reed contact
    • Housing, cover: PC, +20% glass fibre reinforced
    • Axis / Seal: Stainless steel (316L) / FKM (EPDM on request)
    • Pipe diameter: DN 15 to 50
    • Flow velocity max.: 10 m/s
  • Series V10 Miniature Flow Switch - Dwyer

    Series V10 Miniature Flow Switch

    Dwyer

    Dwyer offers the Flotect miniature flow switch for proof of flow or no flow in 1/2" to 2" pipe with a leak proof brass body. These are weatherproof switches using a hermetically sealed reed switch encapsulated in a polypropylene switch housing. A trimmable stainless steel vane is provided with a removable laminated template.
    • Switch Housing: Polypropylene
    • Body: Heavy duty leak proof brass or optional 303 stainless steel
    • Switch Adjustment: Normally Open (NO) or Normally Closed (NC)
    • Pipe Diameter: 1/2" to 2"